Quick Start
In order to get the most from your BASX A-100 amplifier, we urge you to read the entire manual. If
you just want to connect it to a source and a pair of speakers and don't need to know about all the
triggering options and other features right away, this section will cover the basics you will need to
get started.
•
Find a secure location for your A-100.
•
Verify that the Line Voltage switch (on the rear panel) is set for the correct voltage.
•
Set the Trigger Switch to On, which will configure the A-100 to be switched On and Off
directly by the rear panel AC Power Switch.
•
Connect the A-100 to a pair of 8 ohm or 4 ohm speakers using reasonably heavy gauge
speaker wires (at least 18 gauge).
•
Connect a line level input source.
•
Find some music you really like to listen to.
•
Turn on the AC Power Switch and turn up the volume a bit!
•
Enjoy!
Consider taking the time to read the rest of this manual while you are comfortably enjoying your
BASX A-100.
X
-100
A
BAS
Page 12