Quick Start
To get the most from your UPA-500, we urge you to read the entire manual. If you just can't
wait to listen to it, this section will cover the basics you need to get started.
•
Find a secure location for your UPA-500.
•
Connect your UPA-500 to a signal source.
•
Connect your UPA-500 to a set of speakers (4 ohm or 8 ohm) using reasonably heavy
gauge speaker wires (at least 18 gauge).
•
Find some music you really like to listen to.
•
Turn on the AC Power switch and turn up the volume a bit!
•
Enjoy!
While you're enjoying your UPA-500, take the time to read the rest of the manual to learn
more about it.
UPA-500
Page 8