Abus TVAC14000A User Manual page 51

View when idle
Default settings/selection of
languages
View when idle
Select the required setting for the view when idle
using the arrow keys VOL+/- and confirm your
selection with the menu button.
If the monitor is in the live cast, it goes into idle
after 2 minutes with no further entries.
Motion detection or an entry will end the idle state.
The following 4 setting options are possible when
idle:
Four-fold view when idle
The four-fold view is displayed.
5 second dwell time
Sequence mode with 5 second dwell time.
10 second dwell time
Sequence mode with 10 second dwell
time.
15 second dwell time
Sequence mode with 15 second dwell
time.
Select the required setting for the factory
settings/language selection using the arrow keys
VOL+/- and confirm your selection with the menu
button.
German
Set the system to default settings, with the
language set to German.
English
Set the system to default settings, with the
language set to English.
French
Set the system to default settings, with the
language set to French.
51
English