Explanation Of Symbols; Important Safety Information - Abus TVAC14000A User Manual

Explanation of symbols

The triangular high voltage symbol is used to warn of the risk of
injury or health hazards (e.g. caused by electric shock).
The triangular warning symbol indicates important notes in this user manual which
must be observed.
This symbol indicates special tips and notes on the operation of the unit.

Important safety information

All guarantee claims are invalid in the event of damage caused by non-compliance with
this user manual. We cannot be held liable for resulting damage.
In the event of material or personal damage caused by improper operation or non-
compliance with the safety information, we cannot be held liable. All guarantee claims
are void in such cases.
This device has been manufactured in accordance with international safety standards.
Please read the following safety instructions carefully.
Safety information
1. Power supply
Only operate the monitor and camera through a power source which supplies the mains power
specified on the type plate. If you are unsure of the installation location's power supply, contact
your power supply company. Disconnect the device from the power supply before carrying out
maintenance or installation work.
2. Overloading
Avoid overloading electrical sockets, extension cables, and adapters, as this can result in fires or
electric shocks.
3. Liquids
Only install the monitor in dry rooms which are protected from dust. Protect
the device from the ingress of liquid of any kind.
4. Cleaning
Only use a damp cloth to clean the monitor and camera. Do not use corrosive cleaning materials.
Disconnect the monitor and camera from the power supply before cleaning.
5. Ventilation
The ventilation openings on the monitor must not be covered up or obstructed.
Prevent objects and liquids from penetrating into the monitor, e.g. via ventilation openings.
6. Accessories
Only connect accessories that are expressly suitable for their intended purpose. Otherwise,
hazardous situations or damage to the monitor or camera may occur.
7. Installation location
The camera is suitable both for operation in protected outdoor areas as well as indoors. The
product may be damaged if it is dropped, even from a low height. Install the camera so that the
image sensor is not exposed to direct sunlight. Pay attention to the installation instructions in the
corresponding section of this user manual.
The monitor should not be placed in the direct proximity of heaters, stoves other sources of heat
or in direct sunlight and is only suitable for use indoors.
33
English