Table of Contents
Advertisement
Press POWER an the
RA check list before you begin.
remote or Combination
VCR.
O All connections are made (see page 5.)
[] Your Combination VCR is plugged in.
1
ABC
2
08
Select a channel.
Using CHAY
or
NUMBERED
keys.
Adjust volume.
Press VOL+—.
PLAY/
<| >
REPEAT
|
PHONES
1 2
Jack
24 001481114
NITE Mode
Color and picture intensity levels are adjusted so the screen is
easier on your eyes during night time use.
O NITE | Press NITE.
« NITE mode may be selected
when watching TV or playing
a tape.
To Cancel, press NITE.
* Previous settings are restored.
+ NITE mode is cancelled when power is
turned off or power failure occurs.
E Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key, and then enter the
remaining two digits.
E Rapid Tune
Press R-TUNE to display the last channel you were watching.
m Audio Mute
Press MUTE to instantly mute the sound.
Press again, to restore the previous sound level.
E Phones
Connect an earphone (not supplied) or headphones (not
supplied) to the Phones Jack.
E SELF-DEMO Mode
With Power ON, hold down PLAY/REPEAT on the
Combination VCR for 5 seconds to display demo screen.
Repeat this to exit.
8
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
