Assembly - NordicTrack X7i User Manual

ASSEMBLY

• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• After shipping, there may be an oily substance on
the exterior of the incline trainer. This is normal.
If there is an oily substance on the incline trainer,
wipe it off with a soft cloth and a mild, non-abra-
sive cleaner.
1. Go to www.iconsupport.eu on your computer
and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Service
• allows us to notify you of upgrades and offers
Note: If you do not have internet access, call
Customer Service (see the front cover of this
manual) and register your product.
2. Make sure that the power cord is unplugged.
Remove the four 3/8" x 3 1/4" Screws (18)
from the Base (74) (only one side is shown).
Save the Screws.
• To identify small parts, see page 6.
• Assembly requires the following tools:
the included hex keys
To avoid damaging parts, do not use power tools.
1
2
7
18
74