Troubleshooting Tips - Gamma 5800 Els Owner's Manual

TROUBLESHOOTING TIPS

PROBLEM
String slips in clamps
String slips in gripper
String clamp base slips on turntable
Electrical system does not function
String tension too tight or too loose
With time and use, the clamping surfaces of your machine may become oily or dirty and result
in string or clamp slippage while stringing. Periodic cleaning of the String Clamps, String
Clamp Base, and String Gripper is recommended using a cleaning solvent such as isoproyl
alcohol and a mild abrasive tool such as a toothbrush.
OPTIONAL TOOLS AND ACCESS
MGEMC MACHINE COVER
MDCSC FIXED BAD STRING CLAMPS
MFSC FLOOR STAND CASTERS
MTC CALIBRATOR
SGSM STRINGER'S MAT
CARE & CLEANING
20
SOLUTION
- Adjust gap between clamp jaws
- Clean clamp jaws
- Adjust gripper jaws spacing
- Clean gripper jaws
- Adjust clamp base
- Check power source
- Check power cord connection
- Check tension using a tension
calibrator, adjust machine
calibration if necessary