Wireless Remote Controller Yt1F (Moto); Function Of Press Buttons - Gree GWHD(48S)NM3CO Service Manual

Super Free Match
Service Manual

3.2 Wireless Remote Controller YT1F (MOTO)

Notes:
a. Be sure that there are no obstructions between the receiver and the remote controller;
b. Do not drop or throw the remote controller;
c. Do not let any liquid into the remote controller and expose the remote controller to direct sunlight or any
place where is very hot.
d. This is a general use remote controller. If press some button which is not available for the corresponding
function, the unit will keep the original running status.

3.2.1 Function of Press Buttons

1) ON/OFF (
Press this button to turn on/off the unit. After that, the sleep function will be canceled but the preset time is
still remained.
2)
－
The preset temperature can be decreased by pressing this button. If the button is pressed down for more than
2 seconds, the temperature will be decreased quickly until it is released, with ℃ (℉) displayed all the time.
Under Auto mode, the temperature adjustment is unavailable.
3) ＋
The preset temperature can be increased by pressing this button. If the button is pressed down for more than
2 seconds, the temperature will be increased quickly until it is released, with ℃(℉) displayed all the time. Under
Auto mode, the temperature adjustment is unavailable. The setting range is 16-30 ℃ or 61-86℉
4) FAN
Auto, Low, Middle, or High fan speed can circularly selected by pressing this button. After powered on, the
default is Auto speed. Under Dehumidifying mode, only Low fan speed is available.
5) MODE
CONTROL 38
)