Gree GWHD(48S)NM3CO Service Manual page 164

Super Free Match
Service Manual
◆ Remove air deflecting plate modules
Steps
Remove sub-assy of
air deflecting plate
◆ Remove the water tray
Steps
Remove the water
tray
◆ Remove the evaporator
Steps
Remove the
evaporator
MAINTENANCE 160
Illustrations
Illustrations
Illustrations
Operation Instructions
Remove the air deflecting
plates from the air deflecting
plate support assembly, and
then remove both ends from
the air sweeping motor. joint
(As is shown in the graph,
arrow represents the support
assembly and circle the air
sweeping motor joint.)
Operation Instructions
Remove the water tray
Operation Instructions
Remove the screws as
shown by the arrow in the
graph (There are 6 screws
on left and right of the
evaporator and 5 on
evaporator outlet press
plate modules)