Mounting The Frame - Gamma 5003 Owner's Manual

ASSEMBLY INSTRUCTIONS

MOUNTING THE FRAME

Adjusting the Inner Racquet Supports
The white racquet supports are adjustable to accommodate
all racquets and provide maximum support to the racquet
frame. Screw the pads up or down so they contact the
frame at a maximum height without blocking the grommet
holes.
BRIDGE
Height Adjustment
The turntable height can be adjusted to suit
the stringer. To adjust, loosen the two set
screws on the lower column support post be-
low the bellows assembly. Adjust the amount
of engagement between the upper and lower
column supports until the desired height is
attained. Make sure that the tension track is
still aligned with the long leg of the base and
tighten the two set screws to lock the upper
support column into place.
Special Throat Mounting
Racquets with a bridge that is thinner than
the rest of the frame or are tapered from
head to throat require special mounting
to ensure the frame is not damaged. The
white support pads need to be moved
from the inside of the racquet bridge to the
throat of the racquet.
8