Alcatel-Lucent 7210 SAS Configuration Manual page 52

Show Commands
===============================================================================
IP Addr/mask
-------------------------------------------------------------------------------
192.168.250.0/24
===============================================================================
A:ALA-A#
A:ALA-A# show router static-route preference 4
===============================================================================
Route Table
===============================================================================
IP Addr/mask
-------------------------------------------------------------------------------
192.168.254.0/24
===============================================================================
A:ALA-A#
A:ALA-A# show router static-route next-hop 10.10.0.254
===============================================================================
Route Table
===============================================================================
IP Addr/mask
-------------------------------------------------------------------------------
192.168.253.0/24
===============================================================================
A:ALA-A#
status
Syntax status
Context show>router
Description This command displays the router status.
Output Router Status Output — The following table describes the output fields for router status
information.
Router
Max Routes
Total Routes
Sample Output
A:DUT-B>show>router# show router status
================================================================
Router Status (Router: Base)
Page 52
Pref Metric Type Nexthop
5 1
Pref Metric Type Nexthop
4 1
Pref Metric Type Nexthop
5 1
Label
The administrative and operational states for the router.
The maximum number of routes configured for the system.
The total number of routes in the route table.
7210 SAS D, E OS Router Configuration Guide
ID 10.200.10.1
BH black-hole
NH 10.10.0.254
Description
Interface Active
to-ser1 Y
Interface Active
n/a Y
Interface Active
n/a N