Alcatel-Lucent 7210 SAS Configuration Manual page 47

Redirects
Unreachables : Number - 100
TTL Expired
===============================================================================
A:SIM7#
*A:Dut-C# show router 1 mvpn
===============================================================================
MVPN 1 configuration data
===============================================================================
signaling
UMH Selection
vrf-import
vrf-export
vrf-target
C-Mcast Import RT
ipmsi
admin status
hello-interval
tracking support
spmsi
join-tlv-packing
data-delay-interval: 3 seconds
data-threshold
===============================================================================
route-table
Syntax route-table [ip-address [/mask] [longer|exact]]|[summary]
Context show>router
Description
This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
ip-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length.
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
exact — Displays the exact route matching the ip-prefix/mask masks.
summary — Displays a route table summary information.
Output Standard Route Table Output — The following table describes the standard output fields for the
route table.
Dest Address
7210 SAS D, E OS Router Configuration Guide
: Number - 100
: Number - 100
: Bgp
: Highest-Ip
: N/A
: N/A
: target:1:1
: target:10.20.1.3:2
: pim-asm 224.1.1.1
: Up
: N/A
: Disabled
: pim-ssm 225.0.0.0/32
: N/A
: 224.0.0.0/4 --> 1 kbps
Values
ipv4-address:
ipv4-prefix-length:
Label
The route destination address and mask.
IP Router Configuration
Time (seconds)
Time (seconds)
Time (seconds)
auto-discovery : Enabled
intersite-shared : Enabled
three-way-hello : N/A
hello-multiplier : 35 * 0.1
Improved Assert : N/A
a.b.c.d (host bits must be set to 0)
0 — 32
Description
- 10
- 10
- 10
Page 47