Alcatel-Lucent 7210 SAS Configuration Manual page 49

Route Table Summary
===============================================================================
-------------------------------------------------------------------------------
Static
Direct
-------------------------------------------------------------------------------
Total
===============================================================================
A:ALA-A#
static-arp
Syntax static-arp [ip-addr | ip-int-name | mac ieee-mac-addr]
Context show>router
Description
This command displays the router static ARP table sorted by IP address. If no options are present, all
ARP entries are displayed.
Parameters ip-addr — Only displays static ARP entries associated with the specified IP address.
ip-int-name — Only displays static ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays static ARP entries associated with the specified MAC address.
Output Static ARP Table Output — The following table describes the output fields for the ARP table.
IP Address
MAC Address
Age
Type
Interface
No. of ARP
Entries
Sample Output
A:ALA-A# show router static-arp
===============================================================================
ARP Table
===============================================================================
IP Address
-------------------------------------------------------------------------------
10.200.0.253
7210 SAS D, E OS Router Configuration Guide
Label
The IP address of the static ARP entry.
The MAC address of the static ARP entry.
The age of the ARP entry. Static ARPs always have
Inv — The ARP entry is an inactive static ARP entry (invalid).
Sta — The ARP entry is an active static ARP entry.
The IP interface name associated with the ARP entry.
The number of ARP entries displayed in the list.
MAC Address
00:00:5a:40:00:01 00:00:00 Sta
Active
1
6
7
Description
Age Type Interface
to-ser1
IP Router Configuration
Available
1
6
7
00:00:00
Page 49
for the age.