Alcatel-Lucent 7210 SAS Configuration Manual page 51
Hide thumbs
Also See for 7210 SAS:
- Service manual (952 pages) ,
- Configuration manual (558 pages) ,
- Quality of service manual (404 pages)
Table of Contents
Advertisement
next-hop ip-address — Only displays static routes with the specified next hop IP address.
Output
Static Route Output — The following table describes the output fields for the static route table.
IP Addr/mask
Pref
Metric
Type
Next Hop
Protocol
Interface
Active
No. of Routes
Sample Output
A:ALA-A# show router static-route
===============================================================================
Route Table
===============================================================================
IP Addr/mask
-------------------------------------------------------------------------------
192.168.250.0/24
192.168.252.0/24
192.168.253.0/24
192.168.253.0/24
192.168.254.0/24
===============================================================================
A:ALA-A#
A:ALA-A# show router static-route 192.168.250.0/24
===============================================================================
Route Table
7210 SAS D, E OS Router Configuration Guide
Values
ipv4-address:
Label
The static route destination address and mask.
The route preference value for the static route.
The route metric value for the static route.
BH — The static route is a black hole route. The
route is
NH — The route is a static route with a directly connected next hop. The
Nexthop
egress IP interface name.
The next hop for the static route destination.
The protocol through which the route was learned.
The egress IP interface name for the static route.
n/a
route is inactive or a black hole route.
N — The static route is inactive; for example, the static route is disabled
or the next hop IP interface is down.
Y — The static route is active.
The number of routes displayed in the list.
Pref Metric Type Nexthop
5
1
5
1
5
1
5
1
4
1
a.b.c.d (host bits must be 0)
Description
.
black-hole
for this type of route is either the next hop IP address or an
— indicates there is no current egress interface because the static
ID
10.200.10.1
NH
10.10.0.254
NH
to-ser1
NH
10.10.0.254
BH
black-hole
IP Router Configuration
for this type of
Nexthop
Interface
Active
to-ser1
Y
n/a
N
n/a
N
n/a
N
n/a
Y
Page 51
Advertisement
Table of Contents
