Alcatel-Lucent 7210 SAS Configuration Manual page 108

Configuration Commands
fragments of a fragmented packet since only the first fragment contains the L4 information.
This option is only meaningful if the protocol match criteria specifies ICMP (1).
The no form of the command removes the criterion from the match entry.
Default no icmp-code
Parameters
icmp-code — The ICMP code values that must be present to match.
icmp-type
Syntax icmp-type icmp-type
no icmp-type
Context config>filter>ip-filter>entry>match
Description This command configures matching on the ICMP type field in the ICMP header of an IP orpacket as
a filter match criterion. Note that an entry containing L4 match criteria will not match non-initial
(2nd, 3rd, etc) fragments of a fragmented packet since only the first fragment contains the L4
information.
This option is only meaningful if the protocol match criteria specifies ICMP (1).
The no form of the command removes the criterion from the match entry.
Default
no icmp-type
Parameters icmp-type — The ICMP type values that must be present to match.
option-present
Syntax option-present {true | false}
no option-present
Context config>filter>ip-filter>entry>match
Description
This command configures matching packets that contain the option field in the IP header as an IP
filter match criterion.
The no form of the command removes the checking of the option field in the IP header as a match
criterion.
Parameters true — Specifies matching on all IP packets that contain the option field in the header. A match will
false — Specifies matching on IP packets that do not have any option field present in the IP header.
Page 108
Values
0 — 255
Values
0 — 255
occur for all packets that have the option field present.
7210 SAS D, E OS Router Configuration Guide