Safety Precautions - Vivax ACP-18COFM50AEEI User Manual

SAFETY PRECAUTIONS

To prevent injury to the user or other people and property damage, the following instructions must be
followed. Incorrect operation due to ignoring of instructions may cause harm or damage.
■ The seriousness is classified by the following indications.
Meanings of symbols used in this manual are as shown below.
■
Never do this.
Always do this.
Connect with the power
properly.
 Otherwise, it may cause
electric shock or fire due to
excess heat generation.
Do not modify power cord
length or share the outlet with
other appliances
 It may cause electric shock or
fire due to heat generation.
Always ensure effective
grounding.
 No grounding may cause
electric shock.
Disconnect the power if
strange sounds, smell, or
smoke comes fromit.
 It may cause fire and electric
shock.
Use the correctly rated
breaker or fuse.
 There is risk of fire or electric
shock.
Ventilate roombefore operating air conditioner if there is a
gas leakage from another appliance.
 It may cause explosion, fire and, burns.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property
Do not operate or stop
the unit by switching on or
off the power.
 It may cause electric shock
or fire due to heat
generation.
Do not operate with wet
hands or in damp
environment.
 It may cause electric shock.
Do not allow water to run
into electric parts.
 It may cause failure of
machine or electric shock.
Do not drink water
drained from air conditioner.
 It contains contaminants and
could make you sick.
Do not use the power
cord close to heating
appliances
 It may cause fire and electric
shock.
Do not damage or use an
unspecified power cord.
 It may cause electric shock or fire.
Do not direct airflow at
roomoccupants only.
 This could damage your health.
Always install circuit
breaker and a dedicated
power circuit.
 No installation may cause fire
 and electric shock.
Do not open the unit
during operation.
 It may cause electric shock.
Do not use the power cord
near flammable gas or
combustibles, such as gasoline,
benzene, thinner, etc.
 It may cause an explosion or fire.
Do not disassemble
or modify unit.
 It may cause failure and electric
shock.
3