Troubleshooting Tips - Vivax ACP-18COFM50AEEI User Manual

TROUBLESHOOTING TIPS

Stop the air conditioner immediately if one of the following faults occur. Disconnect the
power and contact the nearest customer service center.
If the E( 0,1 ........) or P( 0, 1 ....... ) code appears on the LED(LCD)window, disconnect the
power and contact the service people.
Fuse blows frequently or circuit breaker trips frequently.
Trouble
Other objects or water penetrate the air conditioner.
The remote controller won't work or works abnormally.
Other abnormal situations.
Malfunctions
Power cut
Unit may have become unplugged.
Fuse may have blown.
Unit does not
start
Battery in Remote controller may have
been exhausted.
The time you have set with timer is
incorrect.
Unit not cooling Inappropriate temperature
or heating
setting.
(Cooling/ heating
Air filter is blocked.
models only)
Doors or Windows are open.
room very well
Air inlet or outlet of indoor or outdoor unit
while air flowing
has been blocked.
out from the air
Compressor3minutes protection has been
conditioner
activated.
If the trouble has not been corrected, please contact a local dealer or the nearest customer
service center. Be sure to inform them of the detailed malfunctions and unit model.
Notes: Do not attempt to repair the unit yourself.
Always consult an authorised service provider.
Cause
20
What should be done?
Wait for power to be restored.
Check that plug is securely in wall
receptacle.
Replace the fuse.
Replace the battery.
Wait or cancel timer setting.
Set temperature correctly. For detailed
method please refer to "Remote controller
instruction" section.
Clean the air filter.
Close the doors or windows.
Clear obstructions away first, then restart the
unit.
Wait.