Huawei AR1200 series Configuration Manual page 159

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Interface Management
2.
3.
4.
Data preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Set the working mode for G.SHDSL interfaces on the Router to ATM.
<Huawei> system-view
[Huawei] sysname Router
[Router] set workmode slot 1 shdsl atm
Changing the working mode will reset the board in slot 1. Continue? [y/n]:y
INFO: Resetting board[1] succeeded.
By default, G.SHDSL interfaces work in ATM mode.
Step 2 Deactivate G.SHDSL interfaces.
# Deactivate ATM1/0/0.
[Router] interface atm 1/0/0
[Router-Atm1/0/0] shutdown
[Router-Atm1/0/0] quit
# Deactivate ATM1/0/1.
[Router] interface atm 1/0/1
[Router-Atm1/0/1] shutdown
[Router-Atm1/0/1] quit
# Deactivate ATM1/0/2.
[Router] interface atm 1/0/2
[Router-Atm1/0/2] shutdown
[Router-Atm1/0/2] quit
Step 3 Set parameters for G.SHDSL interfaces.
# Set the interface binding mode to M-Pair binding and bind three G.SHDSL interfaces.
[Router] interface atm 1/0/0
[Router-Atm1/0/0] shdsl bind m-pair 3
# Set the transmission standard to G.991.2 Annex B on ATM1/0/0.
[Router-Atm1/0/0] shdsl annex b
# Set the PSD mode to symmetric PSD on ATM1/0/0.
Issue 01 (2012-04-20)
Deactivate G.SHDSL interfaces.
Set parameters for these G.SHDSL interfaces. The parameters include the interface binding
mode, transmission standard, PSD mode, and line probing function. All the parameters
except the line probing function must be the same as those on the DSLAM. Otherwise, the
G.SHDSL interfaces cannot be activated.
Activate the G.SHDSL interfaces.
Working mode of G.SHDSL interfaces on the DSLAM: ATM
Interface binding mode of G.SHDSL interfaces on the DSLAM: M-Pair binding with three
G.SHDSL interfaces bound together
Transmission standard of G.SHDSL interfaces on the DSLAM: G.991.2 Annex B
PSD mode of G.SHDSL interfaces on the DSLAM: symmetric PSD
Slot ID of the 4G.SHDSL board where G.SHDSL interfaces are located: 1
NOTE
In this section, the configuration of G.SHDSL interfaces working in ATM mode is used as an example.
The configuration of G.SHDSL interfaces working in PTM mode is similar except for the working mode
and interface binding mode.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 G.SHDSL Interface Configuration
149