Establishing The Configuration Task; Deactivating A G.shdsl Interface - Huawei AR1200 series Configuration Manual

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Interface Management

14.4.1 Establishing the Configuration Task

Before setting parameters for a G.SHDSL interface, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the data required for the
configuration. This will help you complete the configuration task quickly and efficiently.
Applicable Environment
Parameters for a G.SHDSL interface include the interface binding mode, transmission standard,
PSD mode, and line probing function. The G.SHDSL interface must be configured with the same
parameters as the G.SHDSL interface on the DSLAM except the line probing function.
Pre-configuration Tasks
Before setting parameters for a G.SHDSL interface, complete the following tasks:
l
l
Data preparation
To set parameters for a G.SHDSL interface, you need the following data.
No.
1

14.4.2 Deactivating a G.SHDSL Interface

Before setting parameters for a G.SHDSL interface on the AR1200, deactivate the G.SHDSL
interface.
Context
Deactivating a G.SHDSL interface disconnecting it from the DSLAM. To enable the G.SHDSL
interface to transmit services, reactivate this G.SHDSL interface.
By default, a G.SHDSL interface is activated.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run either of the following commands to enter the G.SHDSL interface view.
l
l
Issue 01 (2012-04-20)
Powering on and starting the AR1200
Obtaining the working mode of the G.SHDSL interface on the DSLAM
Data
Slot ID of the 4G.SHDSL board where the G.SHDSL interface is located
NOTE
If the working mode is set to ATM, run:
interface atm interface-number
If the working mode is set to PTM, run:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 G.SHDSL Interface Configuration
139