Connections - Teac PL-D1800 Owner's Manual

(2) Audio Connections
NOTE: When your unit is in AV1 mode with Scart Output connection, do not connect and playback the AV1
input source (e.g. VCR) as this may cause picture / sound interference.
(3) Speaker connections
Before Connecting
This DVD Receiver is designed to reproduce optimum sound quality when the supplied speakers are used. If you
wish to connect other speakers to the system instead of the supplied speakers, they should be 4 ohms
impedance with a minimum power handling of 50 watts each.
Maintain correct polarity when connecting speakers (colored wire for positive and black wire for negative).
To prevent damage to circuits, never short-circuit the positive and negative speaker output terminals.
Connection
SUBWOOFER
(Can be placed
anywhere in the room)
5
SURROUND
RIGHT SPEAKER (Rear)
GB 10
VCR VCR
AUDIO IN AUDIO IN
VCR VCR
AUDIO OUT AUDIO OUT
2
FRONT RIGHT
SPEAKER
Example: CD RECORDER Example: CD RECORDER
(OPTIONAL) (OPTIONAL)
TV AUDIO OUT TV AUDIO OUT
3
CENTER
SPEAKER (Front)
OPTICAL OUT OPTICAL OUT
COAXIAL OUT COAXIAL OUT
COAXIAL IN COAXIAL IN
1
FRONT LEFT
SPEAKER
SURROUND
LEFT SPEAKER (Rear)
4