Teac PL-D1800 Owner's Manual page 14

The above connections can be expressed by the below table:
FRONT LEFT FRONT RIGHT
SPEAKERS
Unit
L+
L -
Terminals
White
Use Wires Black
Speakers
White
Black
Terminals
Press the button down & insert the wire, then release the button.
Black Wire
Connection of all speakers are the same.
CENTER
R+ R -
C+
Red Black Green
Red Black Green Black
Note: always connect colored wire to colored speaker terminal (+).
always connect black wire to black speaker terminal (-).
Colored Wire
SURROUND
LEFT (REAR) RIGHT (REAR)
C - SL -
SL+
Blue
Black Black
Blue Black
SURROUND PASSIVE
SUBWOOFER
SR - +
SR+
Grey Black
Purple
Grey Black
Purple
Notes
• Do not remove
excessive amount of
insulation on the wire
cords, to avoid the
stripped portion from
touching each other. The
optimal length for the
stripped part should be
around 1/3 inch (or
1cm).
• Do not push the
stripped part too far
into the speaker
connectors.
-
Black
Black
GB 11