Teac PL-D1800 Owner's Manual page 27

5. Press to shift to the minute field and the two minute digits will flash.
6. Use to set the minute.
7. Press OK to confirm the setting.
ON/OFF Timer
Setting the ON/OFF Timer
1. In AV1 / AV2 or TUNER, press MENU button.
2. Press until Timer Setup Mode is selected.
3. Press OK, then use to choose On Time or Off Time.
4. Press OK to enter Set Time mode. Set Time (refer to "Setting the Clock") and press OK.
5. Press to set the function ON or OFF.
6. Press OK for confirmation.
Clock / Sleep Timer
Displaying the Current Time
When in DVD/AV1/AV2/TUNER modes, press SLEEP on the remote control to select SHOW CLK to display
the current time. The clock will stay displayed. Press SLEEP again to SLEEP OFF to resume normal
display. When some keys such as MODE, TONE are pressed, it will display their corressponding options. The
clock will display again, once the options disappear automatically.
Setting the Sleep Timer/Clock
This feature allows you to select a time for the system to switch to the Standby mode automatically.
GB 24