Speaker Connections; Subwoofer Connection - Teac MC-DV250 Owner's Manual

SPEAKER
Connection to an audio component
A DIGITAL OUT terminal
If the component has an DIGITAL IN terminal, connect it with
an optical cable.
DIGITAL OUT (MC-DV250)
q DIGITAL IN (CD-R, MD, etc.)
< Select the proper digital output mode in accordance with
your connection (see page 72).
B
AUDIO IN/OUT jacks
Analog 2-channel audio signal is input or output from these
jacks. Connect the component with an RCA pin cable.
Make sure to connect:
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
18
AUDIO IN
SPEAKER
SUBWOOFER
C
TV
L R
AUDIO IN
Connection 3
MD, CD-R, etc.
DIGITAL
IN
D A
B
TAPE
L R L R
LINE IN LINE OUT
C

Speaker Connections

CAUTION:
To avoid damaging the speakers with a sudden high-level
signal, be sure to switch the power off before connecting
the speakers.
The red speaker terminals are + (positive), and the black
terminals are _ (negative).
Connect the black side of the speaker cable to the black
terminal and the other side to the red terminal.
< If not using the included speakers, make sure the speakers
you use offer a 6 Ω impedance.
D

Subwoofer Connection

Connect the subwoofer with the supplied RCA pin cable.
ENGLISH
MD, VCR, etc.
AUDIO OUT
L R