Above) Are Replaced By Product Specific Items - ESAB A6 GMD Service Manual

The A6 GMD comprises:
1. Sensor, order no. 416 688- -880
2. Control cable (2 m), order no. 416 749- -887
3. Cross saddle for sensor, order no. 416 739- - 880
4. Control unit, order no. 416 065- -880
5. Joint tracking unit, order no. 416 066- - 880
For welding column and boom units the control box and the control cable (points 4 and 5

above) are replaced by product specific items.

Extra equipment for A6 GMD
Sensor finger, order no. 416 719- - 001 (L=100 mm)
S
Sensor finger, order no. 416 719- - 002 (L=150 mm)
S
Sensor finger for internal and external corners, order no 418 091- - 880
S
Auxiliary control power transformer for separate power supply from mains:
S
190, 220, 380, 415, 440, 500 V 50 Hz
200, 230, 380, 415, 440, 500 V 60 Hz, to secondary 42V, 660 VA
see order no. 148 636- -002
Cable 3 x 2.5 mm
S
Sensor cable with 90_- - contact, order no. 418 091- - 887
S
Rubber guard bellows, order no 412 013- - 001
S
Bracket for control box 433 762- -xxx. The bracket is available in different applications.
S
cga9d1ea
2
, for transformer, order no. 2626 134- - 04
- - 5 - -
dga9b005