Connecting Example: Computers - Panasonic PT-SW280A Operating Instructions Manual

Connecting example: Computers

Control computer
Attention
f When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially
available shielded cables.
Note
f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards
is used, images may be interrupted or may not be displayed.
f The <HDMI IN> of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversion cable, but
some devices may not project the image properly or function properly.
f If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate
the projector.
f If the [AUDIO IN SELECT] settings are incorrect, the projector may have malfunctions such as the absence of audio.
f It does not support USB HUB, so plug the optional wireless module (Model No.: ET-WML100E) or the USB memory device into the
<VIEWER/WIRELESS> terminal directly.
32 - ENGLISH
Chapter 2 Getting Started — Connecting
Computer
Computer
USB memory device
Optional wireless module
(Model No.: ET-WML100E)