Table of Contents
Advertisement
[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" ( x page 48) for the operation of the menu screen.
[REALTIME KEYSTONE]
The projector can correct the distortion of the projected image automatically when the projector is installed tilted.
Press as to select [REALTIME KEYSTONE].
1)
Press qw or the <ENTER> button.
2)
f The [REALTIME KEYSTONE] individual adjustment screen is displayed.
Press qw to switch the item.
3)
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f Sometimes the realtime keystone function may not correct the image properly, the operation of the [SCREEN ADJUSTMENT] is required.
f The [REALTIME KEYSTONE] function cannot work when the [FRONT/CEILING] or the [REAR/CEILING] feature is selected in [PROJECTION
METHOD] in the [PROJECTOR SETUP] menu.
[SCREEN ADJUSTMENT]
You can correct the distortion of the projected image that occurs when the projector is installed tilted or when the
screen is tilted or curved.
Press as to select [SCREEN ADJUSTMENT].
1)
2)
Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
Press as to select one item to adjust.
3)
[KEYSTONE]
[CORNER CORRECTION]
[CURVED CORRECTION]
Setting [KEYSTONE]
Press as to select [SCREEN ADJUSTMENT].
1)
2)
Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
Press as to select [KEYSTONE].
3)
4)
Press the <ENTER> button.
f The [KEYSTONE] individual adjustment screen is displayed.
Press asqw to adjust the item.
5)
56 - ENGLISH
Chapter 4 Settings — [POSITION] menu
Executes the realtime keystone function automatically.
Does not execute the realtime keystone function automatically.
Adjusts when the trapezoid of the projected image is distorted.
Adjusts when the four corners of the projected image are distorted.
Adjusts when the linearity is not uniform or the projected image is curved distortion.
Advertisement
Table of Contents
