Panasonic PT-SW280A Operating Instructions Manual page 93

Descriptions of items
1 Page tab
Pages are switched by clicking this item.
2 [Status]
The status of the projector is displayed by clicking this item.
3 [Projector control]
The [Projector control] page is displayed by clicking this item.
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1
2
3
4
5
6
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the firmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [PICTURE MODE]
Displays the setting status of [PICTURE MODE].
5 [INPUT]
Displays the status of the selected input.
6 [LAMP RUNTIME]
Displays the runtime of the lamps (converted value).
7 [SERIAL NUMBER]
Displays the serial number of the projector.
Chapter 5 Operation of Function — Web control function
4 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5 [Change password]
The [Change password] page is displayed by clicking this item.
6 [Download]
The download page of Presenter Light software is displayed by
clicking this item. ( x page 88)
A
ON OFF
8 [AV MUTE]
Displays the status of the AV mute.
9 [VOLUME]
Displays the volume status.
10 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
11 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
12 [SELF TEST]
Displays the self-diagnosis information.
13 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
7
8
9
10
11
12
13
ENGLISH - 93