Panasonic PT-SW280A Operating Instructions Manual page 58

Adjusting [KEYSTONE]
Press asqw to adjust.
1)
f For details, please refer to "Setting [KEYSTONE]" → "Adjusting [KEYSTONE]" ( x page 56).
Adjusting [ARC]
Press asqw to adjust.
1)
Items
Press the q button.
[H]
Press the w button.
Press the a button.
[V]
Press the s button.
Note
f One of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] setting value is valid. When [KEYSTONE], [CORNER
CORRECTION] or [CURVED CORRECTION] adjustment is finished, you adjust the others, the adjusted value will be reset.
f Press the <SCREEN ADJ> button on the remote control when the [KEYSTONE], [CORNER CORRECTION] or [CURVED CORRECTION]
screen is displaying, it will switch to the next adjustment screen.
f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next corner can also
be displayed by pressing the <ENTER> button.
f Correcting up to ±30° for the tilt in the vertical direction and ±30° for the tilt in the horizontal direction are available for adjustments with
[KEYSTONE]. However, the image quality will degrade and it will get harder to focus with more correction. Install the projector so that the
correction will be as small as possible.
f Screen size will also change when [KEYSTONE] is used to perform various adjustments.
f Aspect ratio of the image size may shift depending on the correction.
58 - ENGLISH
Chapter 4 Settings — [POSITION] menu
Operation
The top and the bottom of horizontal line will
be bulge.
The top and the bottom of horizontal line will
be dent.
The left and the right of vertical line will be
dent.
The left and the right of vertical line will be
bulge.
Adjustment