Baud Rate Settings - Raven Cruizer Operation Manual

Baud Rate Settings

Baud rate settings allow the Cruizer console to communicate with other
equipment such as steering, section control or DGPS systems or
components.
1. From the Home
Tools Menu
2. When connecting the products listed below, ensure that the appropriate
port is selected and all messages are set to zero.
Product
SmartBoom/SmartRow
TM-1 Tilt Sensor
SmarTrax
(software version 4.1 or older)
Steering Node
3. Touch Baud Rates
4. Use the following table to enter
the correct baud rate settings for
each port.
Product
TM-1 Tilt Sensor
SmarTrax
(software version 3.2 or older)
SmarTrax
(software versions 4.0 or newer)
Steering Node
SmartBoom/SmartRow
a.SmartBoom and SmartRow will forward the GGA and VTG
messages a 5 Hz when initializing the connection.
1 9
Screen, select:
GPS
Port
A or B
B
B
B
.
a
Output
Port A Port B
---------
---------
Recommended
115200
---------
Recommended
115200 115200
19200
.
19200
38400
19200