Tools Menu; Quick Access Bar; System - Raven Cruizer Operation Manual

Tools Menu

Quick Access Bar

While viewing the
the screen and allows quick access to the Favorites, System, GPS,
Computer, and Vehicle menus. Touch the Show All icon to view all menus
within the Tools
The following pages offer descriptions of each menu found within the
Menu.
Favorites Icon - Refer to the
set up the

System

Switch - Select the source for toggling history on or off. Install and
connect the optional external switch wire to a source of +12V power
to utilize the Hardware setting.
If Touch Screen is selected, touching
Guidance Screen
Tilt - The Tilt icon is only displayed if an optional TM-1 Tilt Module is
connected to the console. Select the Tilt icon to setup and calibrate
the TM-1 Tilt Module. Touch the Information
information for this feature.
Note: The Tilt option only appears if a TM-1 Tilt Module is connected.
The baud rate for Port B must be set to 19200 to allow Cruizer to
communicate with the TM-1. See the
on page 19 for information on other configurations with SmarTrax.
Tools Menu, the Quick Access Bar remains at the top of
Menu.
Favorites Menu.
will toggle coverage history recording On or Off.
Favorites Menu
or
Baud Rate Settings
Tools
section on page 16 to
on the
icon for detailed
section
1 4