Field Markers; Moving Markers; Delete Markers; Ending A Job - Raven Cruizer Operation Manual

Field Markers

While a job is in progress,
as well heads, rock piles or other points of interest. During the application,
Cruizer will display the distance between each marker and the current vehicle
location.
To place a field marker, touch the Marker
Cruizer will set a field marker at the current vehicle location.

Moving Markers

To move a marker, touch the base of the marker and select Move
Touch the desired location for the marker to place the marker in the new
location.

Delete Markers

To delete a marker, touch the base of the marker and select Delete
The marker will be removed.

Ending a Job

Use the following steps to end a Job:
1. Touch Menu
2. To save a report for the job, see the

Powering Down the Cruizer

Use the following steps to power down and shut off the Cruizer. From the
Home Screen:
1. Touch the End Job
2. Select Shut Down
3. Select the Accept
1 3
Field Markers may be added to locate things such
Home
Coverage Maps
icon if a job is in progress.
and Accept
icon again and toggle the power switch off.
at the bottom of the screen.
End Job .
section on page 18.
.
.
.