Disassembly
Removing and Replacing the P-Flex Assembly
44
1.
Remove the daughter board as described in the procedures.
2.
Insert the pointed end of the disassembly tool into the gap next to the
headphone jack on the p-flex assembly and push the p-flex assembly out of the
housing.
Figure 43. Removing the P-flex Assembly
3.
Use the flat edge of the disassembly tool to push the p-flex assembly out of it's
location in the phone chassis.
Figure 44. Removing the P-flex Assembly
January 10, 2008
MOTOROKR E8
P-flex assembly
P-flex assembly
6809517A42-A
v514073
v514074