Level 1 and 2 Service Manual
6809517A42-A
12. Place the slider key into the slider key slot. Ensure that the slider key is
centered on the alignment pin below the slider key. The adhesive will
temporarily hold the slider key in place.
Adhesive tape
Figure 31. Installing the Slider Key
13. Ensure the slider switch on the transceiver PCB is in the center or unlocked
position.
Transceiver PCB
Slider switch
in center position
Figure 32. Installing the Slider Key
January 10, 2008
Slider key
Alignment pin
Disassembly
v514335
v514337
37