Motorola motorokr e8 Service Manual page 42

Disassembly
42
2. Insert the disassembly tool under the daughter board and lift it up carefully
to allow the UI flex to pass through the daughter board.
Figure 40. Removing the Daughter Board
3. Remove the daughter board from the phone.
4. To replace, align the daughter board to the chassis,
5. Insert the UI flex through the slot on the daughter board.
Daughter board
UI Flex
Daughter board slot
Figure 41. Inserting the UI Flex
6. Use the tweezers to remove the liner from the UI flex.
January 10, 2008
Daughter board
UI flex
MOTOROKR E8
v511948
v514315
6809517A42-A