Functioning Accessed From The System Settings Screen; Automatic Notification Of Abnormal Situations - NuAire NU-5800 Operation And Maintenance Manual

8.3.5 Functioning accessed from the System Settings screen:

The "System Settings" menu screen can be accessed from the "Main Screen" by touching the NUAIRE logo:
Environmental Set-Points: Allows adjustment of Temperature, CO2, Door, and Perimeter heater power level
Note: You can also access the Environmental set points by touching any control system numerical value
Performance Monitor:
System Information:
8.3.6 Automatic notification of abnormal situations ( See Section 11 for more detail)
The red "Alarm Status" text message (button) will appear on the
Main Screen to indicate a fault within the Incubator system. An
audible alarm is also heard. The audible alarm is on for 10 seconds
at the beginning of an alarm condition and thereafter, it will be on 1
second every 30 seconds.
By depressing (touching) the Alarm Status text on the Main Screen,
you now reach the Incubator Alarm Status screen which will identify
which Incubator sub-systems are in an alarm state (Temperature,
CO2, or General). You may exit the screen or touch any of the sub-
system buttons which will give you more specific information on
alarm conditions. See Section 11.0 for more specifics on alarm
conditions.
OM0211
Rev 3 March 2013
settings.
in the MAIN SCREEN.
Views a function's Set-Point and Measured values over the last seven days.
Service Settings: Protected by the password 9876, it facilitates Calibrations, Option settings,
and access to Diagnostics.
Views the units Model Number, Serial Number, Control board assembly (CCBA)
Software Revision and the Display board assembly (LCBA) Software Revision.
Display Settings: Allows adjustment of the screen brightness.
Set Password: A 4 digit password can be set and will protect access to Environmental Set points,
and changing the password
System Settings Screen
Page 21 of 48