Information - Tdm Power Supply - Danfoss InLine Manual

Information - TDM power supply

The TDM voltage supply supplies 24 Vdc to the InLine
panel and can withstand a maximum load of 1A.
The TDM voltage supply is double isolated and manufac-
tured of polyurethane.
The TDM voltage supply is mounted directly onto a wall
or ceiling.
The TDM voltage supply meets EN 61558-2-6 standard.
TDM voltage supply dimensions
Panel length
1.00 - 1.19 m
1.20 - 1.39 m
1.40 -1.59 m
1.60 -1.79 m
1.80 -1.99 m
2.00 -2.19 m
2.20 -2.39 m
The power consumption for any actuator should be included in the calculation of the total power supply.
Power consumption for a TWA-A thermal actuator mounted in panel variants ST and RT is calculated as 0.25A.
Example:
Panel 1 with a length of 1.45 m has a max. power consumption of
Panel 2 with a length of 2.55 m has a max. power consumption of
Panel 3 (type RT) with a length of 3.50 m has a max. power consumption of
Panel 4 with a length of 3.50 m has a max. power consumption of
Panel 5 with a length of 3.50 m has a max. power consumption of
Total power consumption:
Where 3 TDM voltage supplies are used, they must be connected so that no TDM is loaded with more than 1A.
Technical information - TDM voltage supply
Voltage input
Voltage output
Power
Efficiency
External temperature
Protection class
Dimensions (l x w x d)
CONVEC
Max. power consumption
0.04 A
0.06 A
0.10 A
0.13 A
0.17 A
0.22 A
0.25 A
VD.YC.D2.02
73 mm
124
mm
Panel length
2.40 -2.59 m
2.60 -2.79 m
2.80 -2.99 m
3.00 -3.19 m
3.20 -3.39 m
3.40 -3.50 m
230 Vac, 50/60 Hz
24 Vdc
24 VA (1 A)
> 77%
Max. 40 °C
IP 44
124 x 73 x 62 mm
© Danfoss 01/2006
62 mm
68
mm
44
mm
12mm
Max. power consumption
0.30 A
0.36 A
0.39 A
0.42 A
0.45 A
0.49 A
0.10 A
0.30 A
0.49 A + 0.25 A
0.49 A
0.49 A
2.12 A
23