Replacing The Flow Restrictor (Flow Restrictor Kit) - Grundfos AQtap Service Instructions With Installation And Operating Instructions

7. Screw in and tighten the screws in the cover.
– Torque = 0.8 Nm
Torque [Nm]
0.8
8. Complete the internal servicing of the AQtap, see section
17.14 Completing steps after internal servicing.

17.13 Replacing the flow restrictor (flow restrictor kit)

1. Prepare the AQtap for internal servicing, see section
17.3 Preparing the AQtap cabinet for internal servicing.
2. Untighten the union nuts.
3. Take out the upper part of the hydraulic part to access the
solenoid valve.
4. Remove the flat gasket.
45