Replacing The Hydraulic Part (Hydraulic Kit) - Grundfos AQtap Service Instructions With Installation And Operating Instructions

11. Screw in and tighten the screw to fix the coil plug.
– Torque = 0.6 ±0.2 Nm
Torque [Nm]
0.6 ±0.2
12. Complete the internal servicing of the AQtap, see section
17.14 Completing steps after internal servicing.

17.7 Replacing the hydraulic part (hydraulic kit)

1. Prepare the AQtap for internal servicing, see section
17.3 Preparing the AQtap cabinet for internal servicing.
2. Unplug the flow sensor connector at the control unit.
3. Unscrew the mounting screw of the coil plug.
4. Remove the coil plug.
35