Replacement Of Spare Parts; Safety Instructions And Requirements; Replacing The Strainer (Strainer Kit) - Grundfos AQtap Service Instructions With Installation And Operating Instructions

17. Replacement of spare parts

17.1 Safety instructions and requirements

DANGER
ELECTRIC SHOCK
Before starting servicing work, read the safety
instructions supplied with the product.
If electrical mains connection is damaged it must be
replaced by Grundfos, it's service agent or similar
qualified persons to avoid a hazard.
All servicing work must only be carried out by
authorised and qualified staff.
Shut down the whole system before any work at the
system components and lines!
Disconnect the AQtap from the power supply before
carrying out servicing and opening the cabinet.
Safety installations, which have been disabled during
servicing, must be enabled again immediately after
servicing.

17.2 Replacing the strainer (strainer kit)

1. Power-off the AQtap and close the shut-off valve.
2. Open the end cap of the strainer to relieve the water pressure.
3. Screw off the water supply.
1/On
0/Off
4. Screw off the strainer and dispose of.
27