Download  Print this page

Advertisement

Names and Functions of Each Parts

Main Remote Controller (RC-7508M)
Display
(
This page)
Set Button
(
This page)
For other settings.
Speaker
Display
The illustration below shows the remote controller display. What is actually displayed depends
on how the water heater is set.
Timer Display
(Eg.: 10:15)
Error Display
Error is displayed when
malfunction occurs.
Burner On Display
This is displayed when
the burner is on.
< Scroll display > to prevent the remote controller screen from burn-in
* In order to prevent the screen burn-in, about 10 minutes after
any remote control operation, the screen display begins to
scroll sideways.
* As soon as the remote controller is used again, the scrolling
stops.
8
(
P26)
Power On/Off Button
For turning the heater on
and off.
Selection
Button
• Used to adjust the
temperature. (
• Used for other settings.
• Details are memorized
upon adjustment or
setting.
High Temperature Display
When the hot water tem-
perature is set between 60
- 80°C, "hi-temp" blinks for
10 seconds.
Selection Bar Display
Selection switches that can
be operated are indicated
by the bar display lighting
up or blinking.
Temperature Setting
(Eg.: 40°C)
Current time (when the clock
is set), the hot water tempera-
ture scrolls sideways.
P12)
(
P13)

Advertisement

Table of Contents

   Related Manuals for andrews WH42

This manual is also suitable for:

Lwh42Lwh56Whx42Wh56Lwhx42Whx56 ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: