Simply Connected Quick Install Guide XFS-1084P 8-Port Fast Ethernet PoE Switch Use the XFS-1084P to: Cost-Effectively Expand a Wired Network Deliver Power and Data for up to Four PoE-Enabled Network Devices Simplify the Installation of IP Security, VoIP and ...
No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The mate- rial in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, func- tion, or design.
XFS-1084P HARDWARE DESCRIPTION Front Panel The front panel of the XFS-1084P includes 8 Link/Activity LEDs, one power LED, four PoE Status LEDs and one PoE Max LED. Please refer to the detailed description of these indicators in Section 2.2 below.
Quick Install Guide XFS-1084P Rear Panel Layout The Rear Panel of the XFS-1084P includes eight 10/100Mbps RJ-45 Ethernet ports and one DC power port used for DC power input. XFS-1084P Rear Panel View CAUTION: Please use the included power supply. If a...
Simply Connected Installation Requirements Install the XFS-1084P in a stable/safe place to avoid any possible damage Inspect the AC power cord to ensure that it is correctly connected and undamaged To avoid electric shock, DO NOT open the XFS-1084P housing ...
Page 8
Connecting Devices Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the XFS-1084P to a device as described below. The XFS-1084P will automatically adjust to the characteristics (speed/duplex) of the device to which it is connected. The PoE function is autosensing.
Consult the dealer or an experienced radio/TV technician for help. Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020, declares that this Luxul XAP-1500 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Need help?
Do you have a question about the XFS-1084P and is the answer not in the manual?
Questions and answers