Luxul Epic 3 Quick Install Manual

Luxul Epic 3 Quick Install Manual

Dual-band ac3100 gigabit router

Advertisement

Quick Links

QUICK INSTALL GUIDE
Epic 3
Dual-Band AC3100 Gigabit Router
XWR-3150
Includes:
Dual-Band Wireless AC3100 Gigabit Router
Dual Band Antennas (4)
Ethernet Cable
Power Adapter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Epic 3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Luxul Epic 3

  • Page 1 QUICK INSTALL GUIDE Epic 3 Dual-Band AC3100 Gigabit Router XWR-3150 Includes: Dual-Band Wireless AC3100 Gigabit Router „ Dual Band Antennas (4) „ Ethernet Cable „ Power Adapter „...
  • Page 2 Preparing for Access IP Addressing The Epic 3 default LAN IP address is 192.168.0.1. The DHCP server on the Epic 3 is configured by default to create a 192.168.0.x network. Both the default LAN IP address and subnet scheme can be changed. However for hassle-free plug-and-play installation of other Luxul hardware, we recom- mend you use the default IP address if possible.
  • Page 3 Connecting Via an Ethernet Device: Use an Ethernet cable to connect „ your computer to one of the green Epic 3 LAN ports. Ethernet is the preferred method of connection. Connecting Via a Wireless Device: Connect a wireless client device to „...
  • Page 4 To enable this feature, ensure one or two compatible access points are connected to the same network as the Epic 3, then select Wireless Controller from the Epic 3 web configuration interface. Follow the online help to add the access point(s) to the profile.
  • Page 5 Hardware Operation Epic 3 Front Panel LED Indicators Indicator Name Status Function 5GHz A 5GHz wireless network is broadcasting. 2.4GHz A 2.4GHz network is broadcasting. 1-4 LED A device is connected to the corresponding Ethernet port. FLASHING Data packets are being transmitted to the connected device.
  • Page 6 Front Panel Epic 3 Front Panel View Rear Panel Epic 3 Rear Panel View...
  • Page 7 A successful factory reset is indicated when all of the Port LEDs flash once. When the System LED starts flashing again, the unit is ready. CAUTION: Resetting the Epic 3 to factory defaults will remove all custom settings.
  • Page 8 Luxul product. © Copyright 2016 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and registered trademarks are property of their respective holders.

This manual is also suitable for:

Xwr-3150

Table of Contents