Luxul XMS-1024 User Manual
  1. Manuals
  2. Brands
  3. Luxul Manuals
  4. Network Router
  5. XMS-1024
  6. User manual

Luxul XMS-1024 User Manual

Gigabit ethernet smart switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Use the XMS-1024 to:
Provide„Intuitive„Network„Management„and„„
„
„
Optimization„Capabilities
SWITCH
Expand„Your„Home„or„Office„10/100/1000„Ethernet„Network
„
„
Future„Proof„Your„Network„with„Gigabit„Speeds„„
„
„
(10X„Performance„of„Fast„Ethernet)
dOptimize„and„Protect„Your„Network„with„Advanced„VLAN,„
„
„
QoS„and„Network„Security„Features
luxul.com
Gigabit Ethernet Smart Switch
Simply Connected

User Guide

XMS-1024
Luxul Xen™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XMS-1024 and is the answer not in the manual?

Questions and answers

Related Manuals for Luxul XMS-1024

Summary of Contents for Luxul XMS-1024

  • Page 1: User Guide

    Simply Connected User Guide XMS-1024 Luxul Xen™ Gigabit Ethernet Smart Switch Use the XMS-1024 to: Provide„Intuitive„Network„Management„and„„ „ „ Optimization„Capabilities SWITCH Expand„Your„Home„or„Office„10/100/1000„Ethernet„Network „ „ Future„Proof„Your„Network„with„Gigabit„Speeds„„ „ „ (10X„Performance„of„Fast„Ethernet) dOptimize„and„Protect„Your„Network„with„Advanced„VLAN,„ „ „ QoS„and„Network„Security„Features luxul.com...

  • Page 2: Table Of Contents

    CAUTION:„„ C are„is„required.„Disregarding„a„caution„can„result„in„data„ loss„or„equipment„malfunction. „ WARNING!: Indicates„a„condition„or„procedure„that„could„result„in„ personal„injury„or„equipment„damage. „ contEntS 1: ProdUct ovErviEw 1.1 Product Introduction 1.2 Product Features 1.3 Product Specifications 1.4 Package Contents © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
  • Page 3 6.1 Health and Safety Recommendations 6.2 FCC Statement: 7: contact LUXUL aPPEndiX 1: coMMon coMMandS aPPEndiX 2: tcP/iP addrESS SEttinG (windowS XP) GLoSSErY luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 4: 1: Product Overview

    Supports„up„to„24„groups„of„port-based„VLANs„and„up„to„128„groups„of„tagged„ „ „ VLANs„based„on„IEEE„802.1Q,„with„VLAN„IDs„ranging„1„~„4094 IEEE„802.3ad„port„trunk„support„provides„8„trunking„groups,„each„of„which„can„ „ „ contain„up„to„12„port„members 8K„MAC„address„table;„Supports„up„to„128„static„MAC„address„entries „ „ QoS„functions:„Mapping„mode„by„port,„IEEE802.1p,„and„TOS„priorities.„Automatic„ „ „ control„for„the„transfer„queue„based„on„4„priorities Provides„control„over„port„access„security,„including„port„MAC„address„filtering,„ „ „ binding„and„aging „ X enConnect„“Plug„and„Play”„Compatibility „ „ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 5: Product Specifications

    MAC„Address„Table:„8K „ „ Switch„Fabric:„48Gbps „ „ Transmission„Method:„Store-and-forward „ „ Auto„uplink„(MDI/MDI-X)„detection„and„configuration „ „ IGMP„Snooping „ „ Loopback„Detection:„Auto„disable„when„loop„is„detected „ „ Port„Mirroring:„one-to-one,„many-to-one,„mirroring„for„Tx/Rx/Both „ „ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...
  • Page 6 „ Power 27.5„Watts„Maximum Consumption Power Supply Internal„Switched„Power,„AC100-240V,„50-60Hz„input operating 32°F„to„104°F„ Temperature (0°C„to„40°C) operating 10%„to„90%„ Humidity (Non-condensing) Dimensions W:„17.3”„x„D:„8.3”„x„H:„1.7”„(W:„439.5mm„x„D:„211mm„x„H:„43.2mm) weight Item:„6.5„lbs„(2.95Kg) „ „ Packaging:„8„lbs„(3.63Kg) „ „ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 7: Package Contents

    XMS-1024 Front Panel View Factory Reset Button:„Used„to„restore„factory„default„settings.„ „ „ To reset to factory defaults,„press„and„hold„the„reset„button„until„the„SYS„ „ LED„turns„off,„approx.„5„seconds.„A„factory„reset„may„take„approximately„a„min- ute„to„complete.„A„successful„Factory„Reset„is„indicated„by„the„Port„LED„lights„ scrolling„once„from„left„to„right.„When„the„SYS„LED„turns„on„the„unit„is„ready. NOTE:„„ T o„hard„reset„the„router„use„the„power„switch.„Turn„the„router„ off,„wait„5„seconds„and„turn„the„unit„back„on.„ „ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 8: Led Indicators

    LED Indicators The„green„LED„indicators„show„the„working„status„of„the„switch.„The„following„ table„describes„the„LED„functionality:„ indicator description name Power This„LED„indicates„that„there„is„power„to„the„XMS-1024 If„LED„is„off,„check„power„connections„and„on/off„ switch„at„the„back„of„the„unit. Link/Act The„Link/Activity„LED„of„the„port„will„be„on„if„there„is„ a„device„connected„to„the„port. Flashing The„Link/Activity„LED„flashes„when„a„port„is„receiving„ or„transmitting„data. There„is„nothing„connected„to„the„port. 1000„Mbps On The„1000„Mbps„LED„will„come„on„if„a„device„capable„ of„1000Mbps„is„connected„to„the„port. If„a„port„has„no„device„connected„or„it„is„not„a„1000„ Mbps„capable„device,„the„1000„Mbps„LED„will„be„off. © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 9: Rear Panel

    Computer„equipped„with„a„Web„browser.„Supported„Web„browser„versions„ „ „ include„Microsoft„IE„6.0„and„up,„Safari„1.0„and„up„or„Mozilla„Firefox„1.0„and„up.„ The„Web„browser„is„used„to„configure„the„XMS-1024. „ P ower„must„be„AC„100-240V~„0.6A(Max)„50/60Hz. „ „ 3.2 Before Connecting to the Network The„XMS-1024„can„be„rack-mounted„or„used„as„a„desktop„switch.„Before„connect- ing„to„the„network,„please„be„aware„of„the„following„requirements:„„„ Install„the„XMS-1024„in„a„stable/safe„place„to„avoid„any„possible„damage „ „ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 10: 4: Xms-1024 Installation

    4.1 Installing the XMS-1024 in a Rack The„XMS-1024„can„easily„be„installed„in„a„standard„19”„rack.„The„XMS-1024„includes„two„ mounting„ears„for„installing„and„stabilizing„the„switch.„For„attaching„the„mounting„ears„ and„installing„the„switch„within„a„rack,„please„refer„to„the„following„illustration: Rack-Mounting the XMS-1024 „ U sing„the„included„screws,„attach„the„mounting„ears„to„each„side„of„the„switch. „ „ „ M ount„the„switch„in„the„rack„with„the„LEDs„facing„outwards.„Be„sure„the„switch„is„ „ „ level„and„properly„secured„within„the„rack.„ 4.2 Desktop Setup For„use„as„a„desktop„device,„position„and„apply„the„included„rubber„feet„to„the„ bottom„of„the„XMS-1024.„ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 11: Network Connections

    The„XMS-1024„offers„2„shared„SFP„optical„module„expansion„ports.„Once„the„ Gigabit„SFP„optical„modules„are„inserted,„these„interfaces„can„support„optical„fiber„ cables„to„extend„the„Gigabit„network„up„to„49„miles—enabling„the„network„to„ extend„beyond„the„300„foot„limitation„of„twisted„pair„Ethernet.„ For„the„RJ-45„ports,„Category-5,„super„Category-5„or„Category-6„unshielded„twisted„ pair„(CAT5/CAT5e/CAT6„UTP)„should„be„used.„For„best„results,„it„is„recommended„ that„Category-6„shielded„twisted„pair„be„used„to„ensure„stable„data„transmission„at„ 1000„Mbps.„ Optical„fiber/cable„should„be„selected„based„on„the„wavelength„of„the„SFP„optical„ module„to„be„used.„ Make„sure„only„one„Uplink„channel„exists„between„switches„or„between„the„XMS- 1024„and„a„router.„Otherwise,„loops„can„occur„and„result„in„network„failure.„ 4.4 Default IP Address The„XMS-1024„„default„IP„address„is„192.168.0.2.„This„address„can„be„changed.„ However,„for„hassle„free„installation„of„other„XenConnect™„plug„and„play„Luxul„ devices,„it„is„recommended„that„the„default„IP„value„be„maintained. luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 12: Chapter:5 Configuration

    Default„user„name:„ admin Default„password: admin Login to the switch with the following steps: 1.„ Plug„an„Ethernet„cable„into„any„of„the„ports„of„the„switch 2.„Plug„the„other„end„into„the„Ethernet„port„of„your„computer„ 3.„Power„on„the„switch 4.„Check„to„see„that„the„IP„address„of„the„computer„is„within„this„network„segment:„ 192.168.0.xxx„(“xxx”„ranges„100~254).„For„example,„192.168.0.100.„For„IP„address„ settings,„refer„to„Appendix„3.„ 5.„Open„the„Web„browser,„and„enter„192.168.0.2.„The„switch„login„window„appears,„ as„shown„below.„ 6.„Enter„the„user„name„and„password„(default„user„name„and„default„password„are„ both„set„as„“admin”),„and„then„click„“OK”„to„login„to„the„switch„configuration„ window. © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 13: Status

    User Guide „ 5.2 Status „ Status:„Displays„the„current„system„status„of„the„XMS-1024 „ „ Hardware„Version:„Hardware„version„of„the„switch „ Firmware„Version:„Software„version„of„the„switch „ DHCP„Client:„Status„of„the„DHCP„client,„set„at„“Disable”„by„default „ IP„Address:„192.168.0.2„by„default „ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 14: Port Settings

    „ „ 5.3.2 Rate Limit 5.3.4 Statistics „ „ 5.3.1 Port „ Port Configuration:„Basic„port„configuration„options„for„the„XMS-1024„include„ „ „ port„enable/disable,„operating„mode„and„flow„control.„The„following„describes„ the„configuration„functionality: Port:„Displays„the„corresponding„port„number„for„viewing„or„changing„settings.„ „ All„24„10/100/1000„Mbps„Ethernet„ports„are„available„for„configuration. Admin:„Either„enables„or„disables„the„corresponding„port.„If„“Disable”„is„ „ selected,„the„port„is„no„longer„operational.„ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 15: Rate Limit

    I n„order„to„set„or„change„“Speed„Duplex”„settings,„you„must„ “Disable”„the„auto-negotiation„function. „ Speed„Duplex:„Select„10„Mbps„half-duplex,„10„Mbps„full-duplex,„100„Mbps„half- „ duplex,„100„Mbps„full-duplex„or„1000„Mbps„full-duplex„mode„for„the„port. Flow„Control:„Support„for„IEEE802.3x„full-duplex„flow„control„and„half-duplex„ „ backpressure„flow„control„disabled„by„default„(if„“Enabled”„the„XMS-1024„will„ automatically„adjust„the„flow„control„mode„depending„on„the„duplex„mode). Port Status: Lists„the„current„settings„of„all„ports,„as„shown„below. „ „ „ 5.3.2 Rate Limit „ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 16: Storm Control

    „ Rate Limit:„Displays„the„bandwidth„control„status„of„all„ports,„as„shown„below. „ „ „ 5.3.3 Storm Control „ Storm Control:„Suppresses„the„transfer„of„bandwidth„limiting„broadcast„packets„ „ „ through„the„switch.„When„broadcast„packets„reach„the„set„bandwidth„limitation,„ the„XMS-1024„automatically„discards„the„packet„to„ensure„a„stable„environment„ that„is„free„from„broadcast„storms.„ Broadcast„Rate:„The„allowed„bandwidth„rate„of„broadcast„packets.„Default„is„ „ 1024kb„or„1mb/second. Multicast„Rate:„The„allowed„bandwidth„rate„of„multicast„packets.„Default„is„ „ 1024kb„or„1mb/second.„ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
  • Page 17 NOTE:„„ T he„XMS-1024„does„not„completely„suppress„broadcast„packets.„ Instead„it„only„limits„the„transmission„rate„for„broadcast„packets. „ 5.3.4 Statistics „ Statistics:„Displays„the„amount„of„data„in„bytes„and„frames„that„have„been„ „ „ received/transmitted„by„all„ports„currently„in„operation,„as„well„as„the„number„ of„error„frames„received/transmitted„by„all„ports„in„operation.„ Clear:„Clears„all„current„port„statistics„data.„ „ Refresh:„Manually„refreshes„the„current„port„statistics„data.„ „ NOTE:„„ T he„statistics„page„does„not„update„dynamically „ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 18: Mirror

    This„function„supports„cross-VLAN„monitoring.„Monitoring„is„allowed„even„if„the„ monitored„port„and„the„monitoring„port„belong„to„different„VLAN„groups.„ Mirror: „ „ Mirror„Port:„Selects„a„port„to„serve„as„the„monitoring„port „ Mirrored„Port:„Selects„one„or„more„ports„to„be„monitored „ 5.5 VLAN A„VLAN„or„Virtual„Local„Area„Networks„can„be„used„to„establish„secure„autono- mous„broadcast/multicast„domains.„A„VLAN„is„used„to„divide„a„network„into„ multiple„network„segments„and/or„to„shrink„broadcast„domains„for„application„or„ departmental„optimization.„Within„a„VLAN,„all„Ethernet„packets,„such„as„unicast,„ multicast,„broadcast„and„unknown„unicast„packets„will„be„transferred„only„to„other„ devices„within„the„VLAN„group.„A„VLAN„can„be„used„to„change„the„topological„ structure„of„the„network„without„any„movement„of„a„network„device„or„change„of„ network„connections.„You„can„modify„the„VLAN„settings„of„a„device„for„example,„ to„“move”„a„device„from„the„VLAN„of„one„group„to„that„of„another„group.„This„ helps„create„secure,„optimized„departmental„(or„function/application„specific)„ networks„that„cannot„be„accessed„by„other„departments,„applications„or„functions.„ This„also„means„the„network„nodes„or„devices„can„be„moved,„changed„or„added„ without„having„to„physically„move„the„device.„ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 19: Vlan Mode

    „ 802.1Q VLAN: This„option„sets„the„XMS-1024„to„operate„in„802.1Q„VLAN„mode „ „ NOTE:„„ W hen„one„VLAN„mode„is„selected,„the„other„mode„will„be„ disabled „ 5.5.2 Port VLAN „ Port VLAN Configuration:„Port„VLAN„uses„the„physical„ports„of„the„switch„to„ „ „ distinguish„between„VLANs.„ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 20: Q Vlan Configuration

    W hen„modifying„an„already„configured„VLAN,„all„ports„will„show„ up„as„unchecked.„Any„port„left„unchecked,„will„not„be„part„of„the„ group.„ „ To„remove„a„port„from„a„specified„VLAN,„first„select„the„VLAN„group„you„ wish„to„remove„it„from.„Then,„check„the„ports„you„wish„to„remain„in„the„ „ VLAN„while„leaving„the„ports„you„wish„to„remove„unchecked. 5.5.3 802.1Q VLAN Configuration „ In„802.1Q„VLAN„mode„(Tagged„mode),„the„port„VLAN„ID„(VID)„is„used„to„distinguish„ to„which„VLAN„the„traffic„belongs.„When„a„packet„passes„through„the„switch,„the„ VID„information„in„the„tag„header„indicates„to„which„VLAN„the„packet„belongs.„ The„switch„then„determines„the„destination„ports„according„to„the„VID„set„in„the„ packet.„ VLAN ID:„Sets„the„VID„identifiers„associated„with„each„port.„All„ports„are„set„to„ „ „ one„by„default.„ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
  • Page 21 „ „ specifies„the„changes„to„be„made„upon„packet„transmit.„Available„options„are„ to„either„add„the„VID„tag„to„the„frame„or„to„remove„the„VID„tag„from„the„frame„ (Tagged/Untagged) Incoming Filter:„Specifying„the„Incoming„Filter„rule„determines„whether„to„ „ „ receive„or„not„receive„the„VID„tagged„packets„that„are„inconsistent„with„the„port„ PVID„ NOTE:„„ C hecking„the„Incoming„Filter„box„will„drop„all„packets„sent„to„ the„port„that„do„not„have„the„specified„PVID„(i.e.„if„the„packet„ is„tagged„as„one„and„the„PVID„is„set„to„two„the„packet„will„be„ dropped.) „ PVID:„Sets„the„VLAN„ID„(VID)„of„the„specified„port „ „ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 22: Trunk

    User Guide 5.6 Trunk „ Trunking„is„used„to„expand„bandwidth,„for„failover,„and/or„to„increase„error„toler- ance„when„networking„multiple„switches„together.„ All„ports„that„are„defined„as„members„of„the„trunk„group„can„be„used„for„trunking„ ONLY„and„cannot„be„used„for„other„purposes,„even„when„they„are„not„being„used„ by„the„trunk„group.„ Cross-VLAN„trunk„grouping„is„not„supported.„All„members„of„a„trunk„group„must„be„ within„the„same„VLAN.„Otherwise„the„trunk„will„not„function„properly.„ When„the„trunk„group„is„used„for„inter-switch„cascading„(Uplinks),„be„sure„the„cas- cading„port„used„for„connecting„with„the„other„switch„is„part„of„the„corresponding„ trunk„group.„The„cascading„of„multiple„ports„(trunk„members)„must„be„done„from„ one„trunk„group„to„a„corresponding„trunk„group.„ CAUTION:„„ N ever„connect„two„trunk„groups„of„a„switch„together„or„ cascade„two„switches„through„more„than„one„trunk„channel.„ Such„configurations„will„result„in„a„network„loop„and„will„ cause„a„broadcast„storm„resulting„in„blocking„of„all„network„ traffic„on„the„switches.„ „ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 23: Qos

    „ reads„a„3-bit„priority„tag„from„the„packet„with„a„valid„VLAN„tag.„If„the„priority„ tag„indicates„a„high„priority,„the„packet„is„mapped„to„high„priority.„When„the„ switch„becomes„busy,„it„processes„the„packets„marked„with„a„high„priority„first.„ 802.1P„Default„Priority „ Port„Priority:„If„“Port„Priority”„is„enabled„and„high„priority„is„assigned„to„a„physi- „ cal„port,„all„packets„passing„this„port„are„mapped„to„high„priority.„As„a„result,„ the„switch„processes„the„packets„received/transmitted„by„this„port„first. Description of QoS Configuration: „ „ Port„ID:„Selects„the„port„to„be„set„ „ Port„Priority:„Select„“low”,„“normal”,„“medium”„or„“high”„for„the„desired„port„ „ priority„ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 24: Mac Settings

    MAC Filter: This„allows„a„MAC„address„to„be„added„to„a„list„that„blocks„that„ „ „ particular„address„from„connecting„to„the„network.„When„the„specified„MAC„ address„tries„to„connect„on„any„port„of„the„XMS-1024,„network„communication„ will„be„blocked.„ MAC Address:„Enter„the„MAC„address„to„be„filtered„ „ „ NOTE:„„ A ny„MAC„address„that„has„been„added„to„the„MAC„filter„will„not„ be„allowed„to„pass„any„traffic„until„it„is„removed„from„the„list„ „ MAC Filter Table:„Lists„the„MAC„addresses„to„be„filtered,„as„shown„below.„To„ „ „ remove„A„MAC„address„from„the„filter„table„and„allow„access„to„the„network,„ click„“Delete”„on„the„right„column„next„to„the„corresponding„MAC„address.„ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 25: 802.1X

    „ 5.9 802.1X 802.1X„provides„methods„and„policies„for„authenticating„network„users„and„allow„ for„network„access.„It„is„a„port-based„authentication„policy,„for„the„purpose„ of„controlling„access„to„a„particular„port.„It„“enables”„the„port„upon„successful„ authentication„to„allow„transmission„of„all„data„or„“disables”„this„port„upon„failed„ authentication.„ 5.9.1 802.1X Configuration 5.9.2 802.1X Port „ „ Configuration „ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...
  • Page 26 Reauthentication Enabled:„Enables„or„disables„the„reauthentication„function.„ „ „ This„setting,„in„tandem„with„the„“Reauthentication„Period”„setting„will„force„ authenticated„devices„to„reauthenticate„after„the„period„expires Reauthentication Period:„Sets„the„time„period„interval„for„required„reauthenti- „ „ cation.„This„period„is„3600„seconds„by„default„(i.e.„reauthentication„is„performed„ each„hour).„ EAP Timeout:„Sets„the„timeout„interval„of„Extensible„Authentication„Protocol„ „ „ (EAP)„authentication„response.„This„is„set„to„30„seconds„by„default„ NOTE:„„ T he„EAP„Timeout„value„may„need„to„be„increased„in„large„or„busy„ networks„to„prevent„authentication„timeout.„ „ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 27: Rstp

    5.10 RSTP Rapid„Spanning„Tree„Protocol„(RSTP)„can„be„used„to„create„connection„links„for„ redundancy„and„failover.„To„avoid„loops,„RSTP„automatically„assigns„a„root„bridge„ or„root„port„and„parameters„are„changed„at„the„bridge„level. 5.10.1 RSTP Configuration 5.10.2 RSTP Port „ „ Configuration NOTE:„„ B ecause„the„RSTP„algorithm„is„complex,„it„is„recommended„ to„use„default„values.„If„modification„to„RSTP„parameters„is„ necessary,„consult„a„networking„expert„and/or„carefully„read„and„ understand„RSTP„definitions„and„procedures.„ „ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 28: Rstp Configuration

    Max Age: Sets„a„value„ranging„6„seconds„to„40„seconds.„If„a„switch„does„not„ „ „ receive„the„BPDU„packet„transmitted„by„the„root„bridge„when„the„maximum„ aging„time„is„up,„the„switch„will„take„over„as„the„root„bridge„and„transmit„the„ BPDU„packets„to„all„other„switches.„If„the„switch„has„the„lowest„priority„level,„it„ will„continue„to„function„as„the„root„bridge.„This„setting„should„be„set„to„a„large„ value,„to„avoid„unnecessary„resetting„of„the„root„bridge.„ Forward Delay:„Sets„a„value„ranging„4„seconds„to„30„seconds.„This„is„the„moni- „ „ toring„time„for„a„switch„port„to„change„from„blocking„status„into„forwarding„ status„(i.e.„how„long„it„will„take„for„a„port„to„become„active„after„another„port„ has„failed).„A„higher„value„means„greater„delay„in„response. Version: Selects„the„version„of„Spanning„Tree„to„use:„RSTP„based„on„802.1W„(de- „ „ fault„value)„or„STP„based„on„802.1D„(Note:„RTSP„is„the„current„industry„standard.) © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 29: Rstp Port Configuration

    „ „ 1024„will„automatically„determine„the„lowest„port„path„cost„depending„on„the„ port„rate.„ 5.10.3 RSTP Status „ RSTP Bridge Overview:„Displays„the„Bridge„ID,„Hello„time,„Maximum„Aging„Time,„ „ „ Forwarding„Delay,„Topology,„and„Root„Bridge„ID„specified„by„the„system„ RSTP Port Status: Displays„the„Path„Cost,„Edge„Port„setting,„P2P„Port,„Protocol,„ „ „ and„Port„State„specified„by„the„system.„ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 30: Igmp Snooping

    „ 5.11.1 Snooping Configuration „ IGMP Configuration: „ „ IGMP:„Enables„or„disables„L2„multicast.„By„default,„this„option„is„disabled „ Router„Ports:„Selects„the„IGMP„ports„for„multicast„snooping „ IGMP Configuration List: „ „ IGMP„Snooping„Enabled:„Enables„or„disables„the„L2„multicast„snooping„ „ function„ IGMP„Query„Enabled:„Enables„or„disables„the„IGMP„query„function.„Once„this„ „ function„is„enabled,„the„multicast„snooping„status„can„be„viewed © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 31: System

    5.12.9 Restore „ 5.12.4 Upgrade „ 5.12.10 Logout „ 5.12.5 IP Configuration „ 5.12.6 MAC Aging „ Configuration 5.12.1 SNMP „ All„management„information„and„counters„are„stored„in„the„Management„ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 32: Change Password

    SNMP„Write„Community:„Sets„the„read/write„community„name.„For„a„device„ „ to„modify„the„SNMP„information„on„the„XMS-1024,„the„SNMP„management„ software„must„contain„the„read/write„community„name SNMP„Trap„Community:„Used„by„the„SNMP„management„software„to„identify„ „ the„switch„sending„the„Trap„message 5.12.2 Change Password „ Change Password: Modifies„the„password„for„switch„login „ „ Old„Password:„Enter„the„old„password„(Default„password„is„“admin”)„ „ New„Password:„Enter„the„new„password„ „ Confirm„New„Password:„Re-enter„the„new„password„ „ NOTE:„A„password„can„consist„of„up„to„15„alpha„numeric„characters.„ „ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
  • Page 33 Apply: Enables„or„disables„the„power„save„mode „ „ 5.12.4 Upgrade Please„visit„the„Luxul„website„to„check„for„firmware„upgrades„and„obtain„upgrade„ instructions.„ Firmware Upgrade: 1.„ Go„to„the„Luxul„website„and„download„the„new„version„of„firmware 2.„Click„“Browse”„to„locate„the„firmware„file„ 3.„Click„“Upgrade”„to„perform„the„update„ CAUTION:„„ D o„not„power„off„the„switch„or„computer„being„used„during„ the„upgrade„or„the„switch„may„be„damaged.„During„upgrade,„ „ it„is„recommended„to„disable„all„network„connections„ except„the„network„connection„of„the„computer„used„for„ the„upgrade. luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...
  • Page 34 Management VLAN: Selects„the„VLAN„of„the„management„computer„ „ „ NOTE:„„ I f„the„Management„VLAN„is„not„setup„properly,„you„will„not„be„ able„to„manage„the„switch. „ CAUTION:„„ A fter„enabling„the„DHCP„client,„you„must„check„for„the„IP„ address„obtained„from„the„DHCP„server„(usually„a„router„or„ sever„in„the„network)„and„then„re-connect„to„the„switch.„It„is„ not„recommended„to„use„this„function.„ „ 5.12.6 MAC Aging Configuration „ The„default„MAC„address„aging„time„is„300„seconds.„The„set„value„should„be„ between„10„seconds„and„65535„seconds.„Otherwise,„the„system„will„report„an„error.„ If„“ARL„Aging”„is„left„unchecked,„the„system„terminates„MAC„address„aging„(not„ recommended).„ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 35: Restore Factory Defaults

    Restore Factory Defaults:„Click„“Apply”„to„restore„the„factory„default„ „ „ configuration CAUTION:„„ R estoring„default„configuration„will„re-set„all„of„your„ settings„to„factory„defaults.„The„switch„will„now„have„the„ default„IP„address„192.168.0.2.„For„login,„both„default„user„ name„and„default„password„are„“admin.”„ „ 5.12.8 Backup „ Backup Current Settings: Click„“Backup”„to„backup„the„current„switch„configura- „ „ tion„settings„to„a„file„ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 36: 6: Regulatory Compliance

    6: REGULAToRY CoMPLIANCE This„device„is„approved„under„the„Luxul„brand„and„designed„to„comply„for„use„spe- cifically„with„other„approved„Luxul„devices.„This„device„is„designed„to„be„compliant„ with„rules„and„regulations„in„locations„where„they„are„sold„and„will„be„labeled„as„ required.„Any„changes„or„modifications„to„Luxul„equipment,„not„expressly„ap- proved„by„Luxul,„could„void„the„user’ s „authority„to„operate„the„equipment.„This„ Luxul„device„when„used„in„conjunction„with„the„approved„Luxul„Models„should„be„ professionally„installed„and„the„Radio„Frequency„Output„Power„will„not„exceed„the„ maximum„allowable„limit„for„those„countries„that„have„regulatory„approval. 6.1 Health and Safety Recommendations Warnings„for„the„use„of„Wireless„Devices:„Please„observe„all„warning„notices„with„ regard„to„the„usage„of„wireless„devices Potentially„Hazardous„Atmospheres:„You„are„reminded„of„the„need„to„observe„ restrictions„on„the„use„of„radio„devices„in„fuel„depots,„chemical„plants„etc.„and„areas„ where„the„air„contains„chemicals„or„particles„(such„as„grain,„dust,„or„metal„powders). Safety„in„Hospitals:„Wireless„devices„transmit„radio„frequency„energy„and„may„ affect„medical„electrical„equipment.„When„installed„adjacent„to„other„equipment,„ it„is„advised„to„verify„that„the„adjacent„equipment„is„not„adversely„affected. © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

  • Page 37: Fcc Statement

    For sales questions If you experience any please contact our problems, please contact Sales Department Technical Support P:„(801)„822-5450„ P:„(801)„822-5450„ E:„sales@luxul.com E:„support@luxul.com To„check„for„firmware„updates„or„download„pre-configured„application„modules,„ visit„luxul.com.„ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 38: Appendix 1: Common Commands

    Displays„details„of„current„active„network„connections„including„ routing„table„and„network„interface„information.„Can„also„be„used„ to„count„the„active„network„connections.„Must„be„run„from„the„ command„line.„ tracert Displays„the„path„taken„by„a„packet„before„reaching„the„target„host„ and„the„specific„time„when„it„reached„each„node.„Similar„to„the„Ping„ command„but„provides„more„detailed„information.„Displays„the„ entire„path„and„IP„address„of„each„node„in„the„path„and„total„elapsed„ tim.„Must„be„run„from„the„command„line.„ APPENDIX 2: TCP/IP ADDRESS SETTING (wINDowS XP) Select„“Start„Control„Panel„(see„Figure„1).„Select„“Classic„View”„if„you„do„not„see„the„ options„below. Figure 1 „ „ © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
  • Page 39 User Guide Double„click„“Network„Connection”„(see„Figure„2).„ Figure 2 „„„ Right-click„“Local„Area„Connection”„and„then„select„“Properties”„in„the„shortcut„ menu.„Select„“Internet„Protocol„(TCP/IP)”„then„click„“Properties”„(see„Figure„3).„ Figure 3 „ „ Select„“Use„the„following„IP„address”,„enter„“192.168.0.xxx”„(“xxx”„ranges„2~254)„ for„IP„address„and„255.255.255.0„for„subnet„mask„(see„Figure„4)„„Note:„do„not„use„ 192.168.0.2„as„this„is„the„address„of„the„switch.„ Figure 4 „ „„ luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460...

  • Page 40: Glossery

    Information on this document supersedes all previous versions. Products and documents subject to change without notice. Products may be discontinued without notice. LUX-UG-XMS-1024 357 South 670 West | Suite 160 | Lindon, UT 84042 036130449 p: 801-822-5450 | f: 801-822-5460...

Table of Contents