Intended use
The Wallbox is a charging station for indoor and outdoor use on which electric or
plug-in hybrid vehicles can be charged. No other devices, such as electric tools, may be connected to
it. The Wallbox is designed for installation on a wall or on a pedestal. Comply with the relevant national
regulations for installing and connecting the Wallbox.
The intended use of the device in every case includes compliance with the ambient conditions for
which this device was developed.
The Wallbox was developed, manufactured, tested and documented on the basis of the relevant safety
standards. If you comply with the instructions and safety information described for its intended use, the
product normally will not pose any danger in terms of property damage or to the health of people.
The instructions contained in this manual must be followed to the letter. Otherwise sources of danger
may be created or safety equipment may be rendered inoperable. In addition to the safety information
provided in this manual, the safety and accident prevention regulations relating to the specific device
must be followed.
Not all versions/options are available in all countries as a result of technical or statutory restrictions.
About this manual
This manual and the functions described in it are valid for devices of the following type:
BMW i Wallbox
This manual is designed exclusively for trained personnel. These are people who, as a result of their
training, skills and experience and their knowledge of the relevant standards, can assess the work
assigned to them and identify possible dangers.
The illustrations and explanations contained in this manual refer to a typical version of the device. Your
device version may differ from this.
Please refer to the operating manual for information and instructions for operating the device.
Package
Package
Wallbox
Installation manual
Operating manual
BMW i Wallbox
1x
1x
1x
9