Surface-Mounted Cable Routing - Cable Inlet From Below; Cable Inlet From Behind - Cable In The Wall - BMW i wallbox Installation Instructions Manual

Surface-mounted cable routing – cable inlet from below
Cable inlet from behind – cable in the wall
Note
The cable is inserted straight from the wall directly from behind into the device. Ensure that the
Wallbox is correctly positioned for this purpose so that the cable opening is directly above the
cable. Do not exceed the bending radii.
2. Route the supply cable in a loop to the cable
gland 2.
Comply with the maximum bending radii of the
cable.
1. Route the supply cable in a loop to the cable
gland 2.
Comply with the maximum bending radii of the
cable.
19