Genie S-80 Service And Repair Manual page 112

Service and Repair Manual
Fault Code Display - Deutz and Perkins Models
Faul t Code Dis play - Flashi ng and Solid LED's - D eutz D 2.9 L4 and Per ki ns 404F- 22 Models
Flashing and Solid LED's - Deutz D 2.9 L4 and Perkins 404F-22 Models
1 Left green LED:
Flashing, engine fault detected. Contact service.
Solid, fault acknowledged. Contact service.
2 Left amber LED: (Perkins models)
Solid,
a) Regeneration is inhibited. No service required.
b) High exhaust temperature during regeneration mode. No service required.
3 Left red LED:
Flashing, engine fault detected. Contact service.
Flashing with right flashing amber LED, engine soot level over 140%. Engine shut down. Contact service.
4 Right green LED:
Flashing, engine fault detected. Contact service.
Solid, fault acknowledged. Contact service.
5 Right amber LED: (Perkins models)
Solid with left amber LED on solid, regeneration has been inhibited and engine soot level is between 80 - 100%.
Regeneration is required.
Flashing with left amber LED on solid, regeneration has been inhibited and soot level is between 100 - 140%. Engine
rpm is de-rated. Regeneration is required.
Flashing with left and right red LED's flashing, engine soot level over 140%. Engine shut down. Contact service.
6 Right red LED:
Flashing, engine fault detected. Contact service.
Flashing with right flashing amber LED, engine soot level over 140%. Engine shut down. Contact service.
96 S-80 • S-85 • S-80X
October 2016
Part No. 1269074