Viessmann VITODENS 222-F Technical Manual page 35

Installation accessories
Filling device with pipe separator
For fitting to the connection sets
■ For installation on finished walls (not for downward connection on
finished walls)
Part no. 7356 492
■ For downward connection on unfinished and finished walls
Part no. 7356 902
Automatic thermostatic mixing valve
Part no. 7265 058
Connection: 7 22 mm
Setting range: 35 to 65°C
Connection bend for condensate drain
Part no. 7461 025
Connection line from the appliance: DN 20
Drain connection: DN 40
Neutralising system
Part no. 7252 666
With neutralising granulate
310
DN 40
Neutralising granulate
Part no. 9524 670
2 x 1.3 kg
VITODENS
(cont.)
Condensate lifting system
Part no. ZK02 486
Automatic condensate lifting system for condensate with a pH value
≥ 2.5 from oil and gas condensing boilers
Components:
■ Condensate container 2.0 l
■ Centrifugal pump
■ Non-return valve
■ Connecting cable (1.5 m long) for fault messaging
■ Power cable (1.5 m long) with plug
■ 4 connection apertures 7 30 mm for condensate inlet with con-
nector 7 max. 40 mm
■ Drain hose 7 10 mm (5 m long)
1500
A Condensate drain
B 4 x condensate inlet with plug
Specification
Rated voltage 230 V~
Rated frequency 50 Hz
Power consumption 70 W
IP rating IP 20
Permissible medium tem- +65 °C
perature
Max. head 50 kPa
Max. pump rate 500 l/h
Alarm contact Changeover contact (floating), breaking
capacity 250 V/4 A
CO limiter
Part no. ZK02 193
Monitoring device for safety shutdown of the boiler in the event of
escaping carbon monoxide.
Wall mounting in the ceiling area near the boiler.
Suitable for:
■ Vitodens 200-W, type B2HB, B2KB
■ Vitodens 222-W, type B2LB
■ Vitodens 222-F, type B2TB, B2SB
■ Vitodens 242-F, type B2UB
A
B
204
262
279
VIESMANN
35
4