Viessmann VITODENS 222-F Technical Manual page 30

Installation accessories
310
Neutralising granulate
Part no. 9524 670
2 x 1.3 kg
Condensate lifting system
Part no. ZK02 486
Automatic condensate lifting system for condensate with a pH value
≥ 2.5 from oil and gas condensing boilers
Components:
■ Condensate container 2.0 l
■ Centrifugal pump
■ Non-return valve
■ Connecting cable (1.5 m long) for fault messaging
■ Power cable (1.5 m long) with plug
■ 4 connection apertures 7 30 mm for condensate inlet with con-
nector 7 max. 40 mm
■ Drain hose 7 10 mm (5 m long)
4
1500
A Condensate drain
B 4 x condensate inlet with plug
Specification
Rated voltage
Rated frequency
Power consumption
IP rating
Permissible medium tem-
perature
Max. head
Max. pump rate
Alarm contact
Service accessories for automated hydronic balancing
See pricelist.
VIESMANN
30
(cont.)
DN 40
A
204
262
279
230 V~
50 Hz
70 W
IP 20
+65 °C
50 kPa
500 l/h
Changeover contact (floating), breaking
capacity 250 V/4 A
CO limiter
For Vitodens 222-F
Part no. ZK02 193
Monitoring device for safety shutdown of the boiler in the event of
escaping carbon monoxide.
Wall mounting in the ceiling area near the boiler.
Suitable for:
■ Vitodens 200-W, type B2HB, B2KB
■ Vitodens 222-W, type B2LB
■ Vitodens 222-F, type B2TB, B2SB
■ Vitodens 242-F, type B2UB
Components:
■ Casing with integral CO sensor, electronic signal generation and
displays for operation, faults and alarm
■ Fixing materials
■ Heat generator communication cable (2.5 m)
5 8
Specification
Rated voltage
Alarm threshold
Signal
Protection class
IP rating
Permissible ambient tem-
perature
B
For Vitodens 333-F
Part no. 7499 330
Monitoring device for safety shutdown of the boiler in the event of
escaping carbon monoxide.
Wall mounting in the ceiling area near the boiler.
Suitable for boilers built from 2004 onwards.
Components:
■ Casing with integral CO sensor, relay and displays for operation
and alarm
■ Fixing materials
■ Power cable (2.0 m long)
■ Connecting cable – relay for burner shutdown (2.0 m long)
7 0
24 V from the control unit
55 ppm CO to EN 50291-1
PWM signal, evaluated by the control
unit
II
IP 20 to EN 60529
0 °C to 40 °C
VITODENS