Install U Bracket Mount; Components - U Bracket Mounting Assembly; Procedure - U Bracket Assembly - Honeywell Thor VM3 Manual

Install U Bracket Mount

Note: This mounting system does not have provisions for an integrated external keyboard mount or scanner holder. These
accessories can be mounted remotely if desired. Contact
Before installation begins, verify you have the applicable vehicle mounting bracket assembly components necessary, as shown
in the following figures.

Components - U Bracket Mounting Assembly

The U bracket kit is available in two configurations:
• With a U Bracket included for new vehicle installations
• Without a U Bracket for installing the Thor VM3 in place of a previous Honeywell vehicle mounted computer, such as a
VX6 or VX7.
U Bracket (only necessary for new installations)
Adapter Bracket (includes screws, flat washers and lock washers to attach
Adapter Bracket to Thor VM3 and to U Bracket). The U bracket may already
be installed on the vehicle where a VX1, VX2, VX4, VX5, VX6 or VX7 was
previously installed.

Procedure - U Bracket Assembly

Equipment Needed: Sockets and a Torque wrench capable of measuring to 50 inch pounds (5.64±.56 N/m).
Note: Torquing tool is not supplied by Honeywell.
Torque Measurement
You will need a torquing tool capable of torquing to 35-50 inch pounds (1.10 N/m). Torque all screws and bolts accord-
ing to the following table:
For these bolts...
1/4-20x5/8 Bolts
M5x16mm Bolts
1/4 Bolts (user supplied)
Technical Assistance
Torque to
50 in/lb (5.6 N/m)
35 in/lb (4.0 N/m)
50.0±5 in/lb (5.64±.56 N/m)
(page 10-1) for details.
4 - 13