Chapter 8 - Specifications And Reference Material; Technical Specifications; Thor Vm3; Vm1D Standard Dock - Honeywell Thor VM3 Manual

9
Specifications and Reference Material

Technical Specifications

Thor VM3

Memory
Mass Storage
Operating System
Radio Modules
Scanner Options
Keyboard
External Connectors
Beeper
Power Supply
Uninterruptible Power Supply
Backup Battery (RCT)

VM1D Standard Dock

Power Connector
COM1Connector
COM2 Connector
CANBUS/AUDIO Connector
USB Connector
Power Switch
External Power Supply
Input Power
2 or 4 GB DDR3 RAM
64 GB mSATA
Microsoft Windows 10 IoT Enterprise (64-bit)
No operating system
802.11 a/b/g/n radio / Bluetooth
No integrated scanner, Optional serial, USB or Bluetooth scanners
Integrated 7-key keypad
Optional 95-key USB keyboard
Optional numeric-only keyboard
Optional adapter cable for Honeywell PS/2 keyboards
Optional external 802.11 / GPS / WWAN antenna connectors
Additional connectors on Smart Dock, see below
Minimum loudness greater than 95dBm at 10 cm in front of unit
10 to 60 VDC isolated
Internal UPS battery, 30-minute life at -30°C (-22°F)
Internal lithium battery maintains Real Time Clock
6-pin connector:
Direct10-60V DC input power
Optional external converters for AC (90-240 VAC) and extended range DC (60-150
VDC)
9-pin male, RS-232 serial port, COM1 with switchable power on pin 9
9-pin male, RS-232 serial port, COM2 with switchable power on pin 9
15-pin male, CANbus/Audio connector supports either audio/microphone via adapter
cable or J1939 Female and J1939 Male connectors via CANbus cable
9-pin female, USB connector supports USB host port via adapter cable
Sealed power switch
AC Adapter, 120-240VAC to 12VDC
DC Input Voltage: 10- 60 VDC,
Input Current: 4.6 Amps (typical),
Input Fuse: 8A Time Delay. Replace with same size, rating and type of fuse:
• Littelfuse 0215008.MXP
• Cooper Bussmann BK1/S506-8-R
• Bel Fuse 5HT 8-R
or equivalent.
9 - 1